13

Proposal: 3D Printing and Rapid Prototyping

I created this topic primarily for 3D Printing, however Rapid Prototyping is becoming much more feasible in home, and there is a lot of other at-home equipment available for doing so, instead of just 3D printers.

What else could this site cover? And are there any other suggestions for a title?

My thoughts so far:

3D Printing
Laser Etching / Cutting
Digital Modeling (CAD)
Computer Controlled Cutting Devices (CNC)

| |
  • 6
    You could broaden the topic far enough to make it a makers.StackExchange. It would include everything about tools/methods/etc. used by individuals or small groups of individuals to perform rapid prototyping. Home automation might fall under that too, but you could explicitly exclude that group if necessary/wanted. – Mast Mar 30 '15 at 13:44
  • 3
    How about this? Makers – Matt Clark May 27 '15 at 7:32
  • What happened to the link? – user-2147482637 Aug 22 '15 at 0:11
  • There were too few followers / propsed questions and the proposal for Makers was shutdown. – Matt Clark Aug 22 '15 at 0:12
8
  • Scanning
  • Shop Space Issues

For a title, how about "3D Printing / Additive Manufacturing"?

I don't see how sub-topics could be created, would they be separate sites?

| |
  • CNC isn't additive manufacturing though, so that is a bit too narrow. – Daniel M. Oct 8 '15 at 2:03
  • @DanielM. CNC is not just additive manufacturing, but additive manufacturing is CNC. CNC is all productions controlled by computers. – WalterV Oct 20 '15 at 11:23
  • @WalterVilla I should have been more specific- CNC milling isn't additive. – Daniel M. Oct 20 '15 at 12:02
  • @DanielM. That makes sense. Sorry ;). – WalterV Oct 20 '15 at 14:18
5

A much broader topic, as mentioned could be simply Makers.

As 3D printing is a narrow scope, this wide topic of makers still reaches the same audience, but can also include all topic of design, rapid prototyping, tooling, methods, and suggestions for people to get help on their latest project.

| |
5

All about digital manufacturing, 3d scanning, design (3d modelling) and production (milling, additive manufacturing and laser cutting). Rapid Prototyping I think could be comprehend microcontrollers like Arduino, RaspberryPI et similia

| |
  • 1
    Came here to mention 3D modelling and design. – Martin Carney Oct 14 '15 at 22:22
  • 1
    "Digital Manufacturing" as a title gets my vote. Then use the site's scope explanation paragraph to refine the boundary. – VirtualMichael Oct 20 '15 at 5:24
4

Construction, repair, and modifications of 3D printers and related tools would be useful.

| |
1

Your proposal could also include 3D Pens.

| |

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .